Bosch Appliances Car Video System UML 172 90 User Manual

High Performance LCD Monitors  
UML-172-90 | UML-192-90 | UML-202-90  
en Installation Manual  
High Performance LCD Monitors  
Table of Contents | en  
iii  
Table of Contents  
1
Safety  
1
1
1.1  
1.2  
1.3  
1.4  
Important Safety Instructions  
Safety Precautions  
4
Important Notices  
4
Customer Support and Service  
11  
2
Unpacking  
13  
13  
14  
16  
17  
2.1  
2.2  
2.3  
2.4  
Parts List  
Exploded View  
Remote Control  
Remote Control Battery Installation  
3
Description  
Features  
Power  
19  
19  
20  
3.1  
3.2  
4
Installing the Monitor  
Ventilation  
21  
21  
21  
21  
22  
22  
23  
23  
23  
24  
24  
24  
24  
25  
27  
4.1  
4.2  
Mounting the Monitor  
Desktop Installation  
Wall Mount Installation  
4.2.1  
4.2.2  
4.3  
Connecting the Composite Video Signal to the Monitor  
Connecting the Y/C (S-Video) Signal to the Monitor  
Connecting Audio to the Monitor  
Connecting PC Audio  
4.4  
4.5  
4.5.1  
4.6  
Connecting the PC Signal to the Monitor  
HDMI  
4.6.1  
4.6.2  
4.6.3  
4.7  
DVI  
VGA  
Connecting an Alarm Trigger  
Single / Multiple Monitor Configuration  
4.8  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 2.0 | 2009.03  
iv  
en | Table of Contents  
High Performance LCD Monitors  
5
Navigating the Monitor  
Navigating the Front Panel  
29  
5.1  
5.2  
5.3  
5.4  
5.5  
5.6  
5.7  
5.7.1  
5.7.2  
29  
Navigating the Monitor On-screen Display (OSD)  
On-screen Display Menus  
Custom Menu  
29  
31  
31  
33  
35  
36  
37  
39  
Picture / Sound Menu  
PIP Menu  
Setup Menu  
Configuring Alarm Relay Inputs  
Configuring Auto Switching  
6
Power Management  
Power Consumption  
LED Indicator  
41  
41  
41  
6.1  
6.2  
7
8
Maintenance  
43  
45  
TroubleShooting Guide  
F.01U.076.723 | 2.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Safety | en  
1
1
Safety  
1.1  
Important Safety Instructions  
Read, follow, and retain for future reference all of the following  
safety instructions. Heed all warnings on the unit and in the  
operating instructions before operating the unit.  
1. Cleaning - Unplug the unit from the outlet before cleaning.  
Follow any instructions provided with the unit. Generally,  
using a dry cloth for cleaning is sufficient, but a moist fluff-  
free cloth or leather shammy may also be used. Do not use  
liquid cleaners or aerosol cleaners.  
2. Heat Sources - Do not install the unit near any heat  
sources such as radiators, heaters, stoves, or other  
equipment (including amplifiers) that produce heat.  
3. Ventilation - Any openings in the unit enclosure are  
provided for ventilation to prevent overheating and ensure  
reliable operation. Do not block or cover these openings.  
Do not place the unit in an enclosure unless proper  
ventilation is provided, or the manufacturer's instructions  
have been adhered to.  
4. Water - Do not use this unit near water, for example near a  
bathtub, washbowl, sink, laundry basket, in a damp or wet  
basement, near a swimming pool, in an outdoor  
installation, or in any area classified as a wet location. To  
reduce the risk of fire or electrical shock, do not expose  
this unit to rain or moisture.  
5. Object and liquid entry - Never push objects of any kind  
into this unit through openings as they may touch  
dangerous voltage points or short-out parts that could  
result in a fire or electrical shock. Never spill liquid of any  
kind on the unit. Do not place objects filled with liquids,  
such as vases or cups, on the unit.  
6. Lightning - For added protection during a lightning storm,  
or when leaving this unit unattended and unused for long  
periods, unplug the unit from the wall outlet and  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
2
en | Safety  
High Performance LCD Monitors  
disconnect the cable system. This will prevent damage to  
the unit from lightning and power line surges.  
7. Controls adjustment - Adjust only those controls specified  
in the operating instructions. Improper adjustment of  
other controls may cause damage to the unit. Use of  
controls or adjustments, or performance of procedures  
other than those specified, may result in hazardous  
radiation exposure.  
8. Overloading - Do not overload outlets and extension cords.  
This can cause fire or electrical shock.  
9. Power cord and plug protection - Protect the plug and  
power cord from foot traffic, being pinched by items  
placed upon or against them at electrical outlets, and its  
exit from the unit. For units intended to operate with  
230 VAC, 50 Hz, the input and output power cord must  
comply with the latest versions of IEC Publication 227 or  
IEC Publication 245.  
10. Power disconnect - Units with or without ON/OFF  
switches have power supplied to the unit whenever the  
power cord is inserted into the power source; however,  
the unit is operational only when the ON/OFF switch is in  
the ON position. The power cord is the main power  
disconnect device for switching off the voltage for all units.  
11. Power sources - Operate the unit only from the type of  
power source indicated on the label. Before proceeding,  
be sure to disconnect the power from the cable to be  
installed into the unit.  
For battery powered units, refer to the operating  
instructions.  
For external power supplied units, use only the  
recommended or approved power supplies.  
For limited power source units, this power source  
must comply with EN60950. Substitutions may  
damage the unit or cause fire or shock.  
For 24 VAC units, voltage applied to the unit's power  
input should not exceed 10%, or 28 VAC. User-  
supplied wiring must comply with local electrical  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Safety | en  
3
codes (Class 2 power levels). Do not ground the  
supply at the terminals or at the unit's power supply  
terminals.  
If unsure of the type of power supply to use, contact  
your dealer or local power company.  
12. Servicing - Do not attempt to service this unit yourself.  
Opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified  
service personnel.  
13. Damage requiring service - Unplug the unit from the main  
AC power source and refer servicing to qualified service  
personnel when any damage to the equipment has  
occurred, such as:  
the power supply cord or plug is damaged;  
exposure to moisture, water, and/or inclement  
weather (rain, snow, etc.);  
liquid has been spilled in or on the equipment;  
an object has fallen into the unit;  
unit has been dropped or the unit cabinet is damaged;  
unit exhibits a distinct change in performance;  
unit does not operate normally when the user  
correctly follows the operating instructions.  
14. Replacement parts - Be sure the service technician uses  
replacement parts specified by the manufacturer, or that  
have the same characteristics as the original parts.  
Unauthorized substitutions may cause fire, electrical  
shock, or other hazards.  
15. Safety check - Safety checks should be performed upon  
completion of service or repairs to the unit to ensure  
proper operating condition.  
16. Installation - Install in accordance with the manufacturer's  
instructions and in accordance with applicable local codes.  
17. Attachments, changes or modifications - Only use  
attachments/accessories specified by the manufacturer.  
Any change or modification of the equipment, not  
expressly approved by Bosch, could void the warranty or,  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
4
en | Safety  
High Performance LCD Monitors  
in the case of an authorization agreement, authority to  
operate the equipment.  
1.2  
Safety Precautions  
WARNING! High risk:  
This symbol indicates an imminently hazardous situation such  
as “Dangerous Voltage” inside the product. If not avoided, this  
will result in an electrical shock, serious bodily injury, or death.  
WARNING! Medium risk:  
Indicates a potentially hazardous situation. If not avoided, this  
could result in serious bodily injury or death.  
!
CAUTION! Medium risk:  
Indicates a potentially hazardous situation. If not avoided, this  
may result in minor or moderate injury. Alerts the user to  
important instructions accompanying the unit.  
WARNING! Low risk: (without safety alert symbol)  
Indicates a potentially hazardous situation. If not avoided, this  
may result in property damage or risk of damage to the unit.  
!
NOTICE!  
This symbol indicates information or a company policy that  
relates directly or indirectly to the safety of personnel or  
protection of property.  
1.3  
Important Notices  
Accessories - Do not place this unit on an unstable stand,  
tripod, bracket, or mount. The unit may fall, causing serious  
injury and/or serious damage to the unit. Use only with the cart,  
stand, tripod, bracket, or table specified by the manufacturer.  
When a cart is used, use caution and care when moving the  
cart/apparatus combination to avoid injury from tip-over. Quick  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Safety | en  
5
stops, excessive force, or uneven surfaces may cause the cart/  
unit combination to overturn. Mount the unit per the  
manufacturer's instructions.  
All-pole power switch - Incorporate an all-pole power switch,  
with a contact separation of at least 3 mm in each pole, into the  
electrical installation of the building.  
If it is needed to open the housing for servicing and/or other  
activities, use this all-pole switch as the main disconnect device  
for switching off the voltage to the unit.  
Coax grounding:  
Ground the cable system if connecting an outside cable  
system to the unit.  
Connect outdoor equipment to the unit's inputs only after  
this unit has had its grounding plug connected to a  
grounded outlet or its ground terminal is properly  
connected to a ground source.  
Disconnect the unit's input connectors from outdoor  
equipment before disconnecting the grounding plug or  
grounding terminal.  
Follow proper safety precautions such as grounding for  
any outdoor device connected to this unit.  
U.S.A. models only - Section 810 of the National Electrical Code,  
ANSI/NFPA No.70, provides information regarding proper  
grounding of the mount and supporting structure, grounding of  
the coax to a discharge unit, size of grounding conductors,  
location of discharge unit, connection to grounding electrodes,  
and requirements for the grounding electrode.  
NOTICE!  
This device is intended for use in public areas only.  
U.S. federal law strictly prohibits surreptitious recording of oral  
communications.  
Your Bosch product was developed and manufactured with  
high-quality material and components that can be recycled and  
reused. This symbol means that electronic and electrical  
appliances, which have reached the end of their working life,  
must be collected and disposed of separately from household  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
6
en | Safety  
High Performance LCD Monitors  
waste material. Separate collecting systems are usually in place  
for disused electronic and electrical products. Please dispose  
of these units at an environmentally compatible recycling  
facility, per European Directive 2002/96/EC.  
Environmental statement - Bosch has a strong commitment  
towards the environment. This unit has been designed to  
respect the environment as much as possible.  
Electrostatic-sensitive device - Use proper CMOS/MOS-FET  
handling precautions to avoid electrostatic discharge.  
NOTE: Wear required grounded wrist straps and observe proper  
ESD safety precautions when handling the electrostatic-  
sensitive printed circuit boards.  
Fuse rating - For security protection of the device, the branch  
circuit protection must be secured with a maximum fuse rating  
of 16A. This must be in accordance with NEC800 (CEC Section  
60).  
Grounding and polarization - This unit may be equipped with a  
polarized alternating current line plug (a plug with one blade  
wider than the other blade). This safety feature allows the plug  
to fit into the power outlet in only one way. If unable to insert  
the plug fully into the outlet, contact a locally certified  
electrician to replace the obsolete outlet. Do not defeat the  
safety purpose of the polarized plug.  
Alternately, this unit may be equipped with a 3-pole grounding  
plug (a plug with a third pin for earth grounding). This safety  
feature allows the plug to fit into a grounded power outlet only.  
If unable to insert the plug into the outlet, contact a locally  
certified electrician to replace the obsolete outlet. Do not  
defeat the safety purpose of the grounding plug.  
Moving - Disconnect the power before moving the unit. Move  
the unit with care. Excessive force or shock may damage the  
unit and the hard disk drives.  
Outdoor signals - The installation for outdoor signals, especially  
regarding clearance from power and lightning conductors and  
transient protection, must be in accordance with NEC725 and  
NEC800 (CEC Rule 16-224 and CEC Section 60).  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Safety | en  
7
Permanently connected equipment - Incorporate a readily  
accessible disconnect device in the building installation wiring.  
Pluggable equipment - Install the socket outlet near the  
equipment so it is easily accessible.  
Power disconnect - Units have power supplied whenever the  
power cord is inserted into the power source. The power cord  
is the main power disconnect for all units.  
Power lines - Do not locate the camera near overhead power  
lines, power circuits, or electrical lights, nor where it may  
contact such power lines, circuits, or lights.  
SELV  
All the input/output ports are Safety Extra Low Voltage (SELV)  
circuits. SELV circuits should only be connected to other SELV  
circuits.  
Because the ISDN circuits are treated like telephone-network  
voltage, avoid connecting the SELV circuit to the Telephone  
Network Voltage (TNV) circuits.  
Video loss - Video loss is inherent to digital video recording;  
therefore, Bosch Security Systems cannot be held liable for any  
damage that results from missing video information. To  
minimize the risk of lost digital information, Bosch Security  
Systems recommends multiple, redundant recording systems,  
and a procedure to back up all analog and digital information.  
NOTICE!  
This is a class A product. In a domestic environment this  
product may cause radio interference, in which case the user  
may be required to take adequate measures.  
FCC & ICES INFORMATION  
(U.S.A. and Canadian Models Only, CLASS A)  
This device complies with part 15 of the FCC Rules. Operation is  
subject to the following conditions:  
this device may not cause harmful interference, and  
this device must accept any interference received,  
including interference that may cause undesired operation.  
Note  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
8
en | Safety  
High Performance LCD Monitors  
This equipment has been tested and found to comply with the  
limits for a Class A digital device, pursuant to Part 15 of the  
FCC Rules and ICES-003 of Industry Canada. These limits are  
designed to provide reasonable protection against harmful  
interference when the equipment is operated in a commercial  
environment. This equipment generates, uses, and radiates  
radio frequency energy and, if not installed and used in  
accordance with the instruction manual, may cause harmful  
interference to radio communications. Operation of this  
equipment in a residential area is likely to cause harmful  
interference, in which case the user will be required to correct  
the interference at his expense.  
Intentional or unintentional modifications, not expressly  
approved by the party responsible for compliance, shall not be  
made. Any such modifications could void the user's authority to  
operate the equipment. If necessary, the user should consult  
the dealer or an experienced radio/television technician for  
corrective action.  
The user may find the following booklet, prepared by the  
Federal Communications Commission, helpful: How to Identify  
and Resolve Radio-TV Interference Problems. This booklet is  
available from the U.S. Government Printing Office,  
Washington, DC 20402, Stock No. 004-000-00345-4.  
INFORMATIONS FCC ET ICES (commercial applications)  
(modèles utilisés aux États-Unis et au Canada uniquement,  
CLASSE A)  
Ce produit est conforme aux normes FCC partie 15. la mise en  
service est soumises aux deux conditions suivantes:  
cet appareil ne peut pas provoquer d'interférence nuisible  
et  
cet appareil doit pouvoir tolérer toutes les interférences  
auxquelles il est soumit, y compris les interférences qui  
pourraient influer sur son bon fonctionnement.  
AVERTISSEMENT: Suite à différents tests, cet appareil s’est  
révélé conforme aux exigences imposées aux appareils  
numériques de Classe A en vertu de la section 15 du règlement  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Safety | en  
9
de la Commission fédérale des communications des États-Unis  
(FCC). Ces contraintes sont destinées à fournir une protection  
raisonnable contre les interférences nuisibles quand l'appareil  
est utilisé dans une installation commerciale. Cette appareil  
génère, utilise et émet de l'energie de fréquence radio, et peut,  
en cas d'installation ou d'utilisation non conforme aux  
instructions, générer des interférences nuisibles aux  
communications radio. L’utilisation de ce produit dans une  
zone résidentielle peut provoquer des interférences nuisibles.  
Le cas échéant, l’utilisateur devra remédier à ces interférences  
à ses propres frais.  
Au besoin, l’utilisateur consultera son revendeur ou un  
technicien qualifié en radio/télévision, qui procédera à une  
opération corrective. La brochure suivante, publiée par la  
Commission fédérale des communications (FCC), peut s’avérer  
utile : « How to Identify and Resolve Radio-TV Interference  
Problems » (Comment identifier et résoudre les problèmes  
d’interférences de radio et de télévision). Cette brochure est  
disponible auprès du U.S. Government Printing Office,  
Washington, DC 20402, États-Unis, sous la référence n° 004-  
000-00345-4.  
AVERTISSEMENT: Ce produit est un appareil de Classe A. Son  
utilisation dans une zone résidentielle risque de provoquer des  
interférences. Le cas échéant, l’utilisateur devra prendre les  
mesures nécessaires pour y remédier.  
Disclaimer  
Underwriter Laboratories Inc. (“UL”) has not tested the  
performance or reliability of the security or signaling aspects of  
this product. UL has only tested fire, shock and/or casualty  
hazards as outlined in UL's Standard(s) for Safety for Closed  
Circuit Television Equipment, UL 2044. UL Certification does not  
cover the performance or reliability of the security or signaling  
aspects of this product.  
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR  
CERTIFICATIONS WHATSOEVER REGARDING THE  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
10 en | Safety  
High Performance LCD Monitors  
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR  
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.  
Disclaimer  
Underwriter Laboratories Inc. (“UL”) has not tested the  
performance or reliability of the security or signaling aspects of  
this product. UL has only tested fire, shock and/or casualty  
hazards as outlined in UL's Standard(s) for Safety for Information  
Technology Equipment, UL 60950-1. UL Certification does not  
cover the performance or reliability of the security or signaling  
aspects of this product.  
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR  
CERTIFICATIONS WHATSOEVER REGARDING THE  
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR  
SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT.  
Copyright  
This user guide is the intellectual property of Bosch Security  
Systems, Inc. and is protected by copyright.  
All rights reserved.  
Trademarks  
All hardware and software product names used in this  
document are likely to be registered trademarks and must be  
treated accordingly.  
NOTICE!  
This user guide has been compiled with great care and the  
information it contains has been thoroughly verified. The text  
was complete and correct at the time of printing. The ongoing  
development of the products may mean that the content of the  
user guide can change without notice. Bosch Security Systems  
accepts no liability for damage resulting directly or indirectly  
from faults, incompleteness or discrepancies between the user  
guide and the product described.  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Safety | en 11  
1.4  
Customer Support and Service  
If this unit needs service, contact the nearest Bosch Security  
Systems Service Center for authorization to return and shipping  
instructions.  
Service Centers  
USA  
Repair Center  
Telephone: 800-566-2283  
Fax: 800-366-1329  
Customer Service  
Telephone: 888-289-0096  
Fax: 585-223-9180  
Technical Support  
Telephone: 800-326-1450  
Fax: 585-223-3508 or 717-735-6560  
Canada  
Telephone: 514-738-2434  
Fax: 514-738-8480  
Europe, Middle East, Africa Region  
Repair Center  
Telephone: 31 (0) 76-5721500  
Fax: 31 (0) 76-5721413  
Asia Region  
Repair Center  
Telephone: 65 63522776  
Fax: 65 63521776  
Customer Service  
Telephone: 86 (0) 756 7633117 or  
86 (0) 756 7633121  
Fax: 86 (0) 756 7631710  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
12 en | Safety  
High Performance LCD Monitors  
Warranty and more information  
For additional information and warranty queries, please contact  
your Bosch Security Systems representative or visit our website  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Unpacking | en 13  
2
Unpacking  
This equipment should be unpacked and handled with care. If  
an item appears to have been damaged in shipment, notify the  
shipper immediately.  
Verify that all the parts listed in the Parts List below are  
included. If any items are missing, notify your Bosch Security  
Systems Sales or Customer Service Representative.  
The original packing carton is the safest container in which to  
transport the unit and must be used if returning the unit for  
service. Save it for possible future use.  
2.1  
Parts List  
The following table lists the parts included:  
Quantity Part  
1
UML-172-90, UML-192-90, or UML-202-90 Color LCD  
Flat Panel Monitor  
1
2
Installation manual  
Power Cords, 3-wire with grounded plug 1.8 m (6 ft)  
long:  
one with a U.S plug type and one with a European  
Continental plug type  
1
1
1
1
1
VGA to VGA (D-SUB) cable, 1.5 m (5 ft)  
DVI-D to DVI-D cable, 1.5 m (5 ft)  
Alarm relay cable with two flying leads  
PC-style audio cable  
Remote control with two (2) batteries  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
14 en | Unpacking  
High Performance LCD Monitors  
2.2  
Exploded View  
Figure 2.1 Front Panel UML-202  
Figure 2.2 Front Panel UML-172 and UML-192  
Number Button  
Description  
1
2
3
4
Input Button Selects the signal to be displayed  
Menu Button Selects the on-screen display (OSD)  
Adjusts the value when in the OSD  
Scrolls up in the OSD  
Adjusts the value when in the OSD or Scrolls down in the OSD  
auto adjusts when in PC mode  
5
6
7
8
Decreases the value when in the OSD Scrolls left in the OSD  
Increases the value when in the OSD Scrolls right in the OSD  
Remote control sensor  
IR Sensor  
LED Indicator Power On (green)  
Power Off, Standby (red)  
Power Button Display Power (On/Off)  
9
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Unpacking | en 15  
Figure 2.3 Side and Bottom Panels  
Side Panel  
Bottom Panel  
Number Connector  
Number Connector  
1
2
Video 1 (AV1) IN  
12  
13  
14  
15  
16  
17  
18  
19  
HDMI IN  
Video 1 (AV1) OUT  
Video 2 (AV2) IN  
DVI IN  
3
D-SUB IN  
PC Stereo IN  
Audio OUT  
4
Video 2 (AV2) OUT  
S-Video (Y/C) IN  
5
6
S-Video (Y/C) OUT  
Audio IN (AV1, S-Video)  
Audio OUT (AV1, S-Video)  
Audio IN (AV2)  
Component Y, Pb, Pr and Sound L, R  
DC 12 V IN  
7
8
Trigger Input  
9
10  
11  
Audio OUT (AV2)  
12 V Adaptor  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
16 en | Unpacking  
High Performance LCD Monitors  
2.3  
Remote Control  
This section details the functions and the usage of the Bosch  
remote control.  
Button  
POWER  
SOURCE  
Numbers  
AUTO  
Function  
Turns the power ON and OFF.  
Selects the PC or Video source.  
Numerals 0-9.  
Auto adjusts to the graphics adaptor.  
Mutes the sound.  
MUTE  
MENU  
Displays the OSD. Pressing the Menu button returns you to the Main  
menu from anywhere in the OSD menus.  
Exits the OSD.  
EXIT  
UP  
Moves the cursor up in an OSD menu.  
Moves the cursor down in an OSD menu.  
Accepts your selection or displays the current mode when in the OSD  
DOWN  
ENTER  
menu.  
Moves the cursor left, decreases item values in an OSD menu, or  
VOL  
decreases sound.  
Moves the cursor right, increases item values in an OSD menu, or  
VOL  
decreases sound.  
INFO  
Displays the information for the settings currently selected for CVBS or  
PC Input.  
STILL  
Freezes the video by pressing the button once and releases the freeze  
by pushing it again.  
PIP  
Activates/deactivates Picture-In-Picture mode.  
Selects the PC or Video source for the PIP. Continuously press this  
P. INPUT  
button to change the selection.  
P. POS  
Moves the position of the sub picture for the PIP mode. Continuously  
press this button to change the selection.  
P. SIZE  
Changes the size of the sub and main picture for the PIP mode.  
Continuously press this button to change the selection.  
SWAP  
Alternates between the main and sub picture for the PIP mode.  
Continuously press this button to change the selection.  
ARC (Aspect  
Selects the screen ratio when in Video mode. Continuously press this  
Ratio Control)  
APC (Auto  
button to change the selection.  
Selects the Picture mode. Continuously press this button to change  
Picture Control) the selection.  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Unpacking | en 17  
ACC (Auto Color Selects the Color mode. Continuously press this button to change the  
Control)  
S. SET  
selection.  
Selects the Sound mode main input or sub input (only available when  
PIP is enabled).  
PC  
Selects the PC mode (HDMI, DVI, PC). Continuously press this button  
to change the selection.  
AV  
Selects the AV mode (AV1, AV2, S-Video). Continuously  
press this button to change the selection.  
COMP  
2.4  
Selects the COMPONENT mode.  
Remote Control Battery Installation  
1. Turn the remote over (buttons facing down) and push  
down on the cover and slide it off.  
2. Insert two (2) new AAA alkaline batteries, matching the  
batteries to the (+) and (-) marks inside the battery case.  
Figure 2.4 Remote Control Battery Placement  
3. Slide the battery cover back into place.  
Note: Replace batteries when required or at least once a  
year. Dispose of used batteries properly.  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
18 en | Unpacking  
High Performance LCD Monitors  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Description | en 19  
3
Description  
The Bosch High Performance Family of LCD monitors display  
PAL or NTSC standard color pictures in CCTV systems. Two (2)  
looping Composite Video BNC connector inputs, two (2)  
looping Audio input RCA, and two (2) looping Y/C (S-Video)  
inputs using a 4-pin mini-DIN are included. In addition, each  
model includes an Analog VGA input using 15-pin D-sub to  
accommodate the increasing use of PCs and digital video  
devices in security applications, an HDMI (High Definition  
Multimedia Input), DVI, PC-RGB (VGA), RC Audio In and Out,  
and Component Video (Y/Pb/Pr) connectors.  
Monitor control functions are accessed via the front panel push  
buttons and On-screen Display (OSD). See Section 2.2 Exploded  
View, Page 14, for front panel descriptions.  
3.1  
Features  
17-inch, 19-inch, and 20-inch models  
90 to 256 VAC Power Supply  
NTSC/PAL Auto-Detect  
High-Resolution Display  
1024 x 768 (UML-172-90)  
1280 x 1024 (UML-192-90)  
1600 x 1200 (UML-202-90)  
VGA Input  
Composite Video Input  
Y/C Input (S-Video)  
On-screen Display (OSD) with Multiple Languages  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
20 en | Description  
High Performance LCD Monitors  
3.2  
Power  
Model No.  
Rated Voltage Voltage Range Power at Rated Voltage Sync Format  
UML-172-90 120/230 VAC  
100 to 240 V < 40 W  
NTSC/PAL  
NTSC/PAL  
NTSC/PAL  
50/60 Hz  
UML-192-90 120/230 VAC  
100 to 240 V  
90 to 256 V  
< 45 W  
50/60 Hz  
UML-202-90 120/230 VAC  
70 W (max)  
50/60 Hz  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Installing the Monitor | en 21  
4
Installing the Monitor  
This chapter outlines the procedures to install the UML-172-90,  
UML-192-90, or the UML-202-90 Series. A qualified service  
person should install the monitor and adhere to all local codes.  
4.1  
Ventilation  
To prevent overheating, ensure that the ventilation openings on  
the rear of the monitor are not covered.  
4.2  
Mounting the Monitor  
The UML-172-90, UML-192-90, and the UML-202-90 are  
designed for use on a desktop or mounted to a wall or rack.  
4.2.1  
Desktop Installation  
The Bosch High Performance monitors are delivered with a 3-  
pole US-style power cord and a 3-pole Euro-style power cord.  
Use the US-style power cord where 120 VAC, 60 Hz power is  
available; use the Euro-style power cord where 230 VAC, 50 Hz  
power is available. The monitor automatically adjusts to either  
power input voltage. The viewing angle of the LCD can be  
adjusted to fit the most comfortable monitoring status.  
Min Degree  
Max Degree  
25° 122 mm  
50° 192 mm  
NOTICE! For the best viewing quality and holding support, the  
suggested bracket angle is 25° to 50°.  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
22 en | Installing the Monitor  
High Performance LCD Monitors  
4.2.2  
Wall Mount Installation  
The square mounting holes (100 mm [3.9 in.] centers) are  
compatible with the Bosch UMM-LW-20B fixed wall mount or  
the UMM-LW-30B swivel/tilt mount.  
Figure 4.1 Mounting the Device  
4.3  
Connecting the Composite Video Signal to  
the Monitor  
There are two (2) BNC connectors located on the rear side  
panel of the monitor for composite video input and two (2) BNC  
connectors for composite video outputs (see Figure 2.3).  
Note: All video inputs are passive loop-through. The impedance  
is automatically set to 75 ohm by the input of the signal on the  
input connector, while operating in a single connection mode  
(see Figure 4.7). If a cable is also connected to the output  
connector, the video signal can be passed on to another  
monitor connected to it via the passive loop-through function.  
Up to three (3) monitors may be connected in this manner (see  
Figure 4.8).  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Installing the Monitor | en 23  
Note: To select between AV1 and AV2, press Input (see  
Figure 2.1, Item 1 or Figure 2.2, Item 1) located on the front of  
the monitor.  
4.4  
Connecting the Y/C (S-Video) Signal to the  
Monitor  
There is one (1) mini-DIN type connector for the S-Video (Y/C)  
input (see Figure 4.2) on the rear side panel.  
Note: Both Y and C inputs are terminated with 75 Ω resistors.  
Figure 4.2 Y/C Connection Pinout  
Number Input  
1
2
3
4
GND  
GND  
Y-signal IN or OUT  
C-signal IN or OUT  
4.5  
Connecting Audio to the Monitor  
There are two (2) sets of mono audio connectors for audio  
input, located at the side panel.  
All audio inputs are active loop-through.  
Audio 1 is associated with Video 1 or Y/C; Audio 2 is  
associated with Video 2.  
Input  
Audio 1  
Audio 2  
Video 1  
Video 2  
S-video  
X
X
X
4.5.1  
Connecting PC Audio  
The rear bottom panel has PC stereo audio IN and audio OUT.  
Connect with 1/8 in. mini phono plug jack to Audio IN.  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
24 en | Installing the Monitor  
High Performance LCD Monitors  
4.6  
Connecting the PC Signal to the Monitor  
There are three ways to connect the PC signal to the monitor;  
HDMI, DVI, and VGA.  
4.6.1  
HDMI  
The monitor can be connected to the HDMI (High Definition  
Multimedia Input) by connecting a HDMI cable (not supplied).  
Figure 4.3 HDMI Input  
4.6.2  
4.6.3  
DVI  
The monitor can be connected by using the supplied DVI-D  
cable and connecting it to the digital DVI-D signal.  
Figure 4.4 DVI Input  
VGA  
The monitor can be connected by connecting the analog VGA  
signal by using the provided VGA cable (D-SUB to D-SUB).  
Figure 4.5 VGA Input  
Pin Description  
Pin Description  
N/A  
10 Signal Cable Detect  
11 Ground  
12 SDA (for DDC)  
13 H-Sync or H+V Sync  
14 V-Synch  
1
2
3
4
5
6
7
8
Red Video  
Green Video  
Blue Video  
Ground  
9
Ground  
Red Ground  
Green Ground  
Blue Ground  
15 SCL (for DDC)  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Installing the Monitor | en 25  
4.7  
Connecting an Alarm Trigger  
The monitor contains an alarm Trigger Input, the right-most  
input on the back panel, and an alarm relay cable. These  
components allow you to connect an alarm relay from a device,  
such as a camera or a door. Connect the two flying leads from  
the alarm relay cable into the relay out ports of the device.  
Then, route the other end of the cable to the Trigger Input  
connector on the back panel of the monitor.  
The following illustration depicts a typical alarm relay  
configuration:  
Figure 4.6 Camera to Monitor Alarm Relay  
Number Description  
1
2
3
Dinion Camera  
Flying leads connected to relay outputs 3 and 4  
UML Back Panel  
In the above example, the flying leads of the alarm relay cable  
are connected to relay output three and four of a Dinion  
camera. The cable is routed to the back panel of the UML  
monitor and the plug-end of the wire is connected to the  
Trigger Input port. See Section 5.7.1 Configuring Alarm Relay  
Inputs, Page 37, for configuring alarm acknowledgement.  
Example: Typical Alarm Trigger Configuration  
In this case, the Dinion camera is used to watch for motion.  
When the camera detects motion it sends an alarm to the UML  
monitor. The monitor, then, switches the input to display the  
video from the Dinion camera and sounds a buzzer.  
1. Route the coax cable from the Dinion Video output to the  
AV1 input of the UML monitor.  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
26 en | Installing the Monitor  
High Performance LCD Monitors  
2. Configure the following settings for the Dinion camera:  
VMD: OSD  
Area: 1  
Active: On  
3. Connect one flying lead to relay output three, on the back  
of the Dinion camera, and connect the other to relay  
output four.  
4. Connect the other end of the Trigger Relay cable to the  
Trigger Input connector on the back of the monitor.  
5. Plug the monitor into a power socket; then press the  
Power button.  
6. On the monitor, access the Trigger menu:  
a. Press the Menu button.  
b. Press the Down Arrow button to access the Setup  
menu.  
c. Press the Right Arrow button to enter the Setup  
menu.  
d. Press the Down Arrow button until Trigger is  
highlighted; then press the Right Arrow button.  
7. Make the necessary changes to the Trigger menu so that  
the settings match the following:  
Trigger  
Trigger Enable  
Trigger Type  
Trigger Input  
Buzzer  
On  
External  
AV1  
On  
Trigger Time  
Trigger Option  
Display Type  
10  
N/O  
M/C  
:Move  
:Input  
:Menu  
8. Press the Menu button three (3) times to exit the menu  
and to return to the video display.  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Installing the Monitor | en 27  
4.8  
Single / Multiple Monitor Configuration  
Figure 4.7 Single Monitor Configuration  
Number Description  
1
2
3
4
Video Camera  
VIDEO 2 (AV2) IN  
VIDEO 2 (AV2) OUT  
VCR  
Figure 4.8 Multiple Monitor Configuration  
Number Description  
1
2
3
Video Camera  
VIDEO 2 (AV2) IN  
VIDEO 2 (AV2) OUT  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
28 en | Installing the Monitor  
High Performance LCD Monitors  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Navigating the Monitor | en 29  
5
Navigating the Monitor  
5.1  
Navigating the Front Panel  
Use the front panel to make any necessary OSD adjustments to  
the UML-172-90, UML-192-90, or to the UML-202-90. See the  
figure below for an explanation of the front panel.  
Figure 5.1 Front Panel Buttons  
Number Button Description  
Input Button Selects the signal to be displayed  
1
2
3
4
Menu Button Selects the on-screen display (OSD)  
Scrolls up in the OSD  
Performs an Autoset when  
connected to the VGA input, which  
automatically adjusts the display to  
match the graphics adapter.  
Decreases the value  
Scrolls down in the OSD  
5
6
7
8
Scrolls left in the OSD  
Scrolls right in the OSD  
Increases the value  
IR Sensor  
Remote control sensor  
LED Indicator Power On (green)  
Power Off, Standby (red)  
Power Button Display Power (On/Off)  
9
5.2  
Navigating the Monitor On-screen Display  
(OSD)  
The UML172-90, UML-192-90, and the UML-202-90 have two (2)  
modes: Video and PC. The LCD is programmed through the on-  
screen display (OSD) menus and submenus where an operator  
can select operating parameters. To access the OSD menus,  
press the Menu button on the front panel or on the remote  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
30 en | Navigating the Monitor  
High Performance LCD Monitors  
control. Use the front panel of the monitor or respective remote  
control to make any necessary adjustments to the OSD.  
NOTICE! When you are navigating through the OSD menus, use  
the Input button to select a menu and use the Menu button to  
exit a menu.  
To navigate the set up menus, follow the steps below:  
1. Connect the CVBS or VGA cable.  
2. If required, press the Input button until a signal is  
displayed. NOTE: Menus are not available without a signal  
applied.  
3. Press the Power button to turn on the unit (see Figure 2.1  
or Figure 2.2).  
4. Press the Menu button to activate the main menu  
selections (see Figure 2.1 or Figure 2.2).  
5. Press the and buttons to select a menu.  
6. Press the Input button to enter the selected menu.  
7. Press the and buttons to select a sub-menu item.  
8. Press the and buttons to toggle the OSD values.  
9. Press the Menu button to exit the selected menu and to  
return to the menu bar or to confirm a selection.  
10. Press the Menu button again to exit the OSD menu bar.  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Navigating the Monitor | en 31  
5.3  
On-screen Display Menus  
There are four (4) on-screen menus that allow you to customize  
your settings. Press the Menu button to access the OSD menu.  
Icon  
Menu  
Custom  
Function  
Adjusts the Brightness, Contrast, Color, Tint, and the  
Sharpness level for video performance of the OSD. (The menu  
options differ between the Video and PC modes.)  
Picture / Sound Adjusts the Picture Mode, Color Tone, Mute, Volume, Size,  
and the PC settings. (The menu options differ between the  
Video and PC modes.)  
PIP  
Adjusts the Input Source, Size, Position, Swap, and the  
Sound Select settings.  
Set Up  
Enables user to Reset the factory default settings and to  
adjust the Language, OSD Tone, Blue Screen, Key Lock,  
Trigger, and Auto Switching settings.  
5.4  
Custom Menu  
To access the Custom menu, press the Menu button on the  
front panel of the monitor. Next, press the right arrow and then  
press the up and down arrows to select a submenu. Press the  
left and right arrow buttons to increase or decrease the values.  
When finished, press the Menu button to save any changes,  
then press the Menu button again to exit the OSD.  
Custom  
Brightness  
Contrast  
Color  
Tint  
Sharpness  
Phase  
50  
50  
50  
50  
20  
3
:Move  
:Input  
:Menu  
Table 5.1 Custom Menu (Video Mode)  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
32 en | Navigating the Monitor  
High Performance LCD Monitors  
Custom  
Brightness  
Contrast  
50  
50  
:Move  
:Input  
:Menu  
Table 5.2 Custom Menu (PC Mode)  
Submenu  
Definition  
Brightness  
Adjusts the brightness level for video performance (range 0-  
100).  
Contrast  
Color  
Adjusts the contrast level for video performance (range 0-100).  
Adjusts the overall intensity of the screen (range 0-100).  
Adjusts the tint of the picture (range 0-100). NTSC only.  
Adjusts the sharpness level for video performance (range 0-  
Tint  
Sharpness  
100).  
Phase (Component only)  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Navigating the Monitor | en 33  
5.5  
Picture / Sound Menu  
To access the Picture / Sound menu, press the Menu button on  
the front panel of the monitor, then press the left and right  
arrows to select the Picture / Sound icon. Press the up and  
down arrows to select the Picture / Sound submenu.  
Picture/Sound  
Picture Mode Custom  
Color Tone  
Mute  
Normal  
Off  
Volume  
Size  
20  
4:3  
DNR  
On  
3D Comb  
On  
:Move  
:Input  
:Menu  
Table 5.3 Picture / Sound Menu (Video Mode)  
Picture/Sound  
Picture Mode Custom  
Color Tone  
Mute  
Normal  
Off  
Volume  
Size  
20  
4:3  
PC  
:Move  
:Input  
:Menu  
Table 5.4 Picture / Sound Menu (PC Mode)  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
34 en | Navigating the Monitor  
High Performance LCD Monitors  
Submenu  
Definition  
Picture Mode  
(Video Mode)  
Selects the automatic picture control mode. Choices are:  
Custom: User selected values of the Custom menu are applied.  
Dynamic: Automatically adjusts the Brightness, Contrast, and  
Sharpness, maximizing the video quality in the picture.  
Standard: Applies factory default values.  
Picture Mode (PC  
Mode)  
Selects the automatic picture control mode. Choices are:  
Custom: User selected values of the Custom menu are applied.  
High: Uses the following values: Brightness = 70, Contrast = 80  
Middle: Uses the following values: Brightness = 60, Contrast = 70.  
Low: Uses the following values: Brightness = 50, Contrast = 60.  
Color Tone  
Selects the color temperature. Choices are: Cool 9300K, Normal  
6500K, Warm 5000K.  
Mute  
Enables/disables audio. Choices are: On and Off.  
Volume  
Controls built-in speaker output volume (range 0-100).  
Size (Video Mode) Selects the Aspect Ratio Control mode. Choices are: 4:3,  
Panorama, Zoom1, Zoom2, Wide.  
DNR (Video Mode) Turns Noise Reduction On or Off. Turning this feature OFF  
reduces the video quality slightly, but improves the monitors  
response time to MOTION.  
PC (PC Mode)  
Selects between Auto or manual adjustment of the desktop  
screen. Auto Adjust: Auto synchronizes screen to graphics  
adaptor.  
Manual choices are: Phase (range 0-100), H-Position (range 0-  
100), V-Position (range 0-100), Frequency (range 0-100).  
3D Comb  
Activates the 3D comb filter.  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Navigating the Monitor | en 35  
5.6  
PIP Menu  
To access the PIP menu, press the Menu button on the front  
panel of the monitor, then press the left and right arrows to  
select the PIP icon. Press the up and down arrows to select the  
PIP submenu.  
PIP  
PIP  
On  
Input Source AV1  
Size  
Position  
Swap  
Sound Select Main  
:Move  
:Input  
:Menu  
Table 5.5 PIP menu  
Submenu  
Definition  
PIP  
Activates the PIP feature.  
Input Source Select the video input source for the PIP area. The selections depend on  
the main video input source. Analog video sources (AV1, AV2, S-Video)  
can display only digital video (Component, HDMI, DVI, PC) inputs in the  
PIP area; digital video sources can only display analog video inputs in the  
PIP area.  
AV1, AV2, S-Video: Component, HDMI, DVI, PC  
Component, HDMI, DVI, PC: AV1, AV2, S-Video  
Size  
Enables 3 screen sizes: full screen side by side, 4:3 side by side, and 4:3  
corner (177 mm [3.03 in.] diagonal).  
Position  
Swap  
Enables 4 positions: bottom right, top right, bottom left, top left.  
Alternates between the main and sub picture for the PIP mode.  
Continuously press to change selection.  
Sound Select Select the sound source from either the Main or the PIP input source  
(only available when PIP is enabled).  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
36 en | Navigating the Monitor  
High Performance LCD Monitors  
5.7  
Setup Menu  
To access the Setup menu, press the Menu button on the front  
panel of the monitor, then press the left and right arrows to  
select the Setup icon. Press the up and down arrows to select  
the Setup submenu.  
Setup  
Reset  
Language  
OSD Tone  
Blue Screen  
Key Lock  
English  
Blue  
Off  
Off  
Trigger  
Auto Switching  
Firmware Version X.XX  
:Move  
:Input  
:Menu  
Table 5.6 Setup Menu  
Submenu  
Reset  
Definition  
Restores default settings.  
Language  
Adjusts the language of the OSD. Choices are: English, French,  
German, Italian, Dutch, Spanish, and Portuguese.  
OSD Tones  
Blue Screen  
Selects the type of background for the OSD menu. Choices are:  
Transparency and Blue.  
Enables or disables video loss indication. Choices are:  
On: displays a blue background when video loss is detected.  
Off: displays a black backgound when video loss is detected.  
Enables or disables the Key Lock function.  
Key Lock  
Trigger  
Opens the Trigger menu allowing you to configure the monitor’s  
repsonse to incoming alarms. See Section 5.7.1 Configuring Alarm  
Relay Inputs, Page 37.  
Auto Switching  
Opens the Auto Switching menu allowing you to configure the way  
the monitor cycles through video inputs. See  
Section 5.7.2 Configuring Auto Switching, Page 39.  
Firmware Version Displays the release level of the monitor firmware.  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Navigating the Monitor | en 37  
NOTICE! When key lock is enabled through the front panel, use  
either the remote control or the front panel buttons to disable  
the key lock command. To disable the key lock feature using the  
front panel buttons, press and hold both the Input and the  
Menu buttons until the monitor displays the Key Unlocked  
message.  
5.7.1  
Configuring Alarm Relay Inputs  
The monitor allows you to connect an alarm relay cable from a  
device (camera or door) to the monitor, and then to configure  
the monitor’s response to an incoming alarm (see  
Section 4.7 Connecting an Alarm Trigger, Page 25).  
Trigger  
Trigger Enable  
Trigger Type  
Trigger Input  
Buzzer  
Off  
External  
AV1  
On  
Trigger Time  
Trigger Option  
Display Type  
20  
N/O  
PIP & FULL  
:Move  
:Input  
:Menu  
Table 5.7 Trigger Menu  
Option  
Definition  
Selections  
ON or OFF  
External  
Trigger Enable Activates the trigger feature.  
Trigger Type  
Specifies the source of the alarm. This option is  
always set to External.  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
38 en | Navigating the Monitor  
High Performance LCD Monitors  
Option  
Definition  
Selections  
Trigger Input  
Select the video input source that the monitor  
displays when an alarm is activated. When the  
monitor receives an alarm input, it switches to the  
speficied input source.  
AV1  
AV2  
S-Video  
Component  
HDMI  
DVI  
PC  
Buzzer  
Activates an audible signal when the monitor  
receives an alarm input and switches to the Trigger  
Input video source.  
ON or OFF  
Note: If the Input video source is the same as the  
Trigger Input, the monitor does not sound the  
buzzer.  
Trigger Time  
Select the amount of time, in seconds, that the  
0–100 seconds  
monitor displays the Trigger Input video source.  
Trigger Option Select the type of physical trigger input. Consult the N/C  
manual for the alarm source to determine your  
selection.  
(normally closed)  
N/O  
(normally open)  
High (2–5 V)  
Low (< .6 V)  
Display Type  
Select the mode in which the monitor displays the  
Trigger Input. The monitor takes one of the following  
actions:  
PIP & FULL  
FULL  
Displays the Trigger Input in the Picture-in-  
Picture position (PIP & FULL) of the current  
video input source.  
Note: The main video source must support the  
Trigger Input source as a PIP option. See  
Section 5.6 PIP Menu, Page 35.  
Switches the display to show the Trigger Input  
in the full screen (FULL).  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Navigating the Monitor | en 39  
5.7.2  
Configuring Auto Switching  
The Auto Switching feature allows the monitor to cycle the  
display of selected video inputs.  
Auto Switching  
Auto Switching Off  
Input  
Time  
10  
:Move  
:Input  
:Menu  
Table 5.8 Auto Switching Menu  
Option  
Definition  
Selections  
ON or OFF  
Auto Swtiching Activates the Auto Switching feature.  
Input  
Time  
Opens another menu in which you select the input  
sources to include in the Auto Switching cycle.  
Select the amount of time, in seconds, that the monitor 0–100 seconds  
displays each selected input source.  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
40 en | Navigating the Monitor  
High Performance LCD Monitors  
Selecting Input Sources for Auto Switching  
Use this menu to add or remove an input source from the Auto  
Switching cycle.  
Auto Switching  
AV1  
AV2  
S-Video  
Component  
HDMI  
DVI  
On  
On  
On  
On  
On  
On  
On  
PC  
:Move  
:Input  
:Menu  
Table 5.9 Auto Switching Menu – Input Source Selection  
1. Use the Up and Down arrow buttons to select an input  
source.  
2. Press the Right Arrow to change the status of the input  
source.  
3. Use the Up and Down arrow buttons to change the status  
of the input source:  
Select On to include the input source in the cycle.  
Select OFF to remove the input source from the cycle.  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Power Management | en 41  
6
Power Management  
These monitors feature a power management system to “power  
down” upon receipt of the display power management signaling  
(DPMS) from a DPMS video card.  
The DPMS-compliant video card performs this signaling system  
by not sending a horizontal, vertical, or a sync signal.  
The monitor enters an appropriate mode through identifying  
each of the three (3) modes of the signaling system.  
6.1  
Power Consumption  
Mode  
Power Consumption  
ON  
70 W  
10 W  
10 W  
10 W  
STANDBY  
SUSPEND  
ACTIVE OFF  
6.2  
LED Indicator  
The power management feature of the monitor is comprised of  
these stages:  
Mode  
LED  
Monitor Operation  
Color  
ON  
Green Normal operation  
STANDBY  
SUSPEND  
ACTIVE OFF  
Flashes Screen blanks after idle time and some electronic  
Red  
circuits or all circuitry in the monitor shuts down.  
UNSUPPORTED Green Normal operation but the screen displays an error  
MODE  
message.  
POWER OFF  
Red  
Not operational.  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
42 en | Power Management  
High Performance LCD Monitors  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
Maintenance | en 43  
7
Maintenance  
To clean the LCD panel, wipe off water droplets or oil  
immediately with absorbent cotton or a soft lint-free cloth.  
Staining and discoloration may occur if left on the panel for  
long periods.  
If the surface (polarizer) of the LCD panel is dirty or stained,  
use absorbent cotton or a soft lint-free cloth to remove the  
residue as follows:  
1. Turn off the computer or display.  
2. Do not spray any liquid directly on the screen. Dampen a  
clean, soft, lint-free cloth with water only (using a paper  
towel or dirty cloth can scratch the screen).  
3. Gently wipe the screen starting from the top of the screen  
to bottom wiping in a downward motion. Be careful not to  
press too hard to avoid damaging the screen.  
4. To avoid streaking, wipe the screen again with another  
clean, dry, lint-free cloth.  
NOTICE! If water does not work, use a mild cleaner labeled for  
use with LCD panels, available at office supply stores.  
Do not use any of the following as a cleaning agent:  
Ketone type materials  
Ethyl alcohol  
Ethyl acid  
Toluene  
Methyl chloride  
Ammonia  
Use of these materials may permanently damage the polarizer  
due to a chemical reaction.  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
44 en | Maintenance  
High Performance LCD Monitors  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
High Performance LCD Monitors  
TroubleShooting Guide | en 45  
8
TroubleShooting Guide  
Problem  
Solution  
No image is  
displayed on  
screen  
Check that the power cord of the monitor is securely  
connected into the wall outlet or grounded extension  
cable or strip.  
Power switch should be in the ON position and the  
LED lit.  
Check that the Brightness and/or Contrast  
adjustments of the display have not been turned  
down to minimum levels.  
“Going to  
The signal cable should be completely connected to  
the video card/computer.  
Sleep” message  
is displayed  
The video card should be completely seated in its slot  
and the computer switched ON.  
Display image is –  
not centered, is  
too small, or too –  
large in the PC  
mode  
Push the down key to activate the Autoset function.  
-or-  
Adjust the Clock and Phase in the PC OSD submenu.  
Monitor does  
Compare the Trigger Option setting on the Trigger menu  
not switch upon with the physical alarm output setting for alarm device.  
trigger input  
Monitor does  
not sound the  
buzzer  
If the video input and the Trigger Input are from the same  
source:  
Set the Trigger Time to zero (0).  
If the video input and the Trigger Input are from different  
sources, check the following settings on the Picture/  
Sound menu:  
Ensure that the Mute option is set to OFF.  
Ensure that the Volume is set to an audible level.  
Bosch Security Systems, Inc.  
Installation Manual  
F.01U.076.723 | 3.0 | 2009.03  
46 en | TroubleShooting Guide  
High Performance LCD Monitors  
Problem  
Solution  
Vertical or  
Push the down key to activate the Autoset function  
(for VGA inputs only).  
horizontal noise  
is present in the  
picture  
-or-  
Adjust the Clock and Phase in the PC OSD submenu.  
Incorrect colors –  
Press the Menu button on the front panel of the  
monitor, then press the down arrow to select the  
Color Tone menu. Press the down arrow on the front  
panel and select Cool, Warm, or Normal.  
- or -  
Press the Menu button on the front panel of the  
monitor, then press the right arrow to select the  
Setup menu. Press the down arrow on the front panel  
and select Recall to reset to the default settings.  
The error  
PC is operating with either a resolution or timing mode  
message “Out of that is not supported by the monitor. Change the PC  
Range” is  
displayed  
timing mode to one of the valid combinations below:  
640 x 480; 60/72/75 Hz  
800 x 600; 60/72/75 Hz  
1024 x 768; 60/70/75 Hz  
1280 x 1024; 60 Hz  
1600 x 1200; 60 Hz  
F.01U.076.723 | 3.0 | 2009.03  
Installation Manual  
Bosch Security Systems, Inc.  
Europe, Middle East, Africa:  
Bosch Security Systems B.V.  
P.O. Box 80002  
5600 JB Eindhoven,  
The Netherlands  
Phone: + 31 40 2577 284  
Fax: +31 40 2577 330  
om  
Americas  
Bosch Security Systems, Inc.  
850 Greenfield Road  
Lancaster, Pennsylvania 17601  
USA  
Telephone +1 888-289-0096  
Asia-Pacific:  
Bosch Security Systems Pte Ltd  
38C Jalan Pemimpin  
Singapore 577180  
Phone: +65 6319 3450  
Fax: +65 6319 3499  
Fax  
Email:  
+1 585-223-9180  
© Bosch Security Systems, Inc. 2009; F.01U.076.723 | 3.0 | 2009.03; Data subject to change without  
notice.  

A O Smith 750 1000 User Manual
Black Decker BL10451HG AR CL User Manual
Bosch Appliances Car Speaker LBC 3430 2 User Manual
Burley Pet Trailer User Manual
Curtis GPD358 User Manual
Electrolux Thermetic 583397 User Manual
Franklin Car Satellite Radio System EVS 6000BT User Manual
FujiFilm Digital Camera 16223575 User Manual
FujiFilm FinePix S3200 User Manual
Hitachi DZMV100A User Manual