Bosch Appliances Computer Monitor UML 080 90 User Manual

Small Size LCD/LED Monitors  
UML-080-90 | UML-082-90 | UML-100-90 | UML-102-90  
en User Manual  
 
Small Size LCD/LED Monitors  
Table of Contents | en  
3
Table of Contents  
1
Safety  
5
5
1.1  
1.2  
1.3  
1.4  
Important safety instructions  
Safety precautions  
8
Important notices  
8
Customer Support and Service  
15  
2
Unpacking  
17  
2.1  
Parts List  
17  
3
Exploded View  
18  
4
Description  
Features  
Power  
21  
21  
22  
4.1  
4.2  
5
Installing the Monitor  
Ventilation  
23  
23  
23  
23  
24  
24  
25  
25  
26  
26  
5.1  
5.2  
5.2.1  
5.2.2  
5.3  
5.4  
5.5  
5.6  
5.7  
Mounting the Monitor  
Desktop Installation  
Wall Mount Installation  
Connecting the Composite Video Signal to the Monitor  
Connecting the Y/C (S-Video) Signal to the Monitor  
Connecting Audio to the Monitor  
Connecting the PC Signal to the Monitor  
Single / Multiple Monitor Configuration  
6
Navigating the Monitor  
28  
28  
29  
30  
30  
32  
6.1  
6.2  
6.3  
6.4  
6.5  
Navigating the Front Panel  
Navigating the Monitor On-screen Display (OSD)  
On-screen Display Menus  
Custom Menu  
Picture/Sound Menu  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
4
en | Table of Contents  
Setup Menu  
Small Size LCD/LED Monitors  
34  
6.6  
7
Power Management  
36  
36  
36  
7.1  
7.2  
Power Consumption  
LED Indicator  
8
9
Troubleshooting  
Maintenance  
37  
38  
10  
Technical Specifications  
UML-080-90/UML-100-90  
UML-082-90/UML-102-90  
39  
39  
40  
10.1  
10.2  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Safety | en  
5
1
Safety  
1.1  
Important safety instructions  
Read, follow, and retain for future reference all of the following  
safety instructions. Heed all warnings on the unit and in the  
operating instructions before operating the unit.  
1. Cleaning - Unplug the unit from the outlet before cleaning.  
Follow any instructions provided with the unit. Generally,  
using a dry cloth for cleaning is sufficient, but a moist fluff-  
free cloth or leather shammy may also be used. Do not use  
liquid cleaners or aerosol cleaners.  
2. Heat Sources - Do not install the unit near any heat  
sources such as radiators, heaters, stoves, or other  
equipment (including amplifiers) that produce heat.  
3. Ventilation - Any openings in the unit enclosure are  
provided for ventilation to prevent overheating and ensure  
reliable operation. Do not block or cover these openings.  
Do not place the unit in an enclosure unless proper  
ventilation is provided, or the manufacturer's instructions  
have been adhered to.  
4. Water - Do not use this unit near water, for example near a  
bathtub, washbowl, sink, laundry basket, in a damp or wet  
basement, near a swimming pool, in an outdoor  
installation, or in any area classified as a wet location. To  
reduce the risk of fire or electrical shock, do not expose  
this unit to rain or moisture.  
5. Object and liquid entry - Never push objects of any kind  
into this unit through openings as they may touch  
dangerous voltage points or short-out parts that could  
result in a fire or electrical shock. Never spill liquid of any  
kind on the unit. Do not place objects filled with liquids,  
such as vases or cups, on the unit.  
6. Lightning - For added protection during a lightning storm,  
or when leaving this unit unattended and unused for long  
periods, unplug the unit from the wall outlet and  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
6
en | Safety  
Small Size LCD/LED Monitors  
disconnect the cable system. This will prevent damage to  
the unit from lightning and power line surges.  
7. Controls adjustment - Adjust only those controls specified  
in the operating instructions. Improper adjustment of  
other controls may cause damage to the unit. Use of  
controls or adjustments, or performance of procedures  
other than those specified, may result in hazardous  
radiation exposure.  
8. Overloading - Do not overload outlets and extension cords.  
This can cause fire or electrical shock.  
9. Power cord and plug protection - Protect the plug and  
power cord from foot traffic, being pinched by items  
placed upon or against them at electrical outlets, and its  
exit from the unit.  
10. Power disconnect - Units have power supplied to the unit  
whenever the power cord is inserted into the power  
source. The power cord is the main power disconnect  
device for switching off the voltage for all units.  
11. Power sources - Operate the unit only from the type of  
power source indicated on the label. Before proceeding,  
be sure to disconnect the power from the cable to be  
installed into the unit.  
For battery powered units, refer to the operating  
instructions.  
For external power supplied units, use only the  
recommended or approved power supplies.  
For limited power source units, this power source  
must comply with EN60950. Substitutions may  
damage the unit or cause fire or shock.  
If unsure of the type of power supply to use, contact  
your dealer or local power company.  
12. Servicing - Do not attempt to service this unit yourself.  
Opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified  
service personnel.  
13. Damage requiring service - Unplug the unit from the main  
AC power source and refer servicing to qualified service  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Safety | en  
7
personnel when any damage to the equipment has  
occurred, such as:  
the power supply cord or plug is damaged;  
exposure to moisture, water, and/or inclement  
weather (rain, snow, etc.);  
liquid has been spilled in or on the equipment;  
an object has fallen into the unit;  
unit has been dropped or the unit cabinet is damaged;  
unit exhibits a distinct change in performance;  
unit does not operate normally when the user  
correctly follows the operating instructions.  
14. Replacement parts - Be sure the service technician uses  
replacement parts specified by the manufacturer, or that  
have the same characteristics as the original parts.  
Unauthorized substitutions may cause fire, electrical  
shock, or other hazards.  
15. Safety check - Safety checks should be performed upon  
completion of service or repairs to the unit to ensure  
proper operating condition.  
16. Installation - Install in accordance with the manufacturer's  
instructions and in accordance with applicable local codes.  
17. Attachments, changes or modifications - Only use  
attachments/accessories specified by the manufacturer.  
Any change or modification of the equipment, not  
expressly approved by Bosch, could void the warranty or,  
in the case of an authorization agreement, authority to  
operate the equipment.  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
8
en | Safety  
Small Size LCD/LED Monitors  
1.2  
Safety precautions  
DANGER!  
High risk: This symbol indicates an imminently hazardous  
situation such as “Dangerous Voltage” inside the product.  
If not avoided, this will result in an electrical shock, serious  
bodily injury, or death.  
WARNING!  
Medium risk: Indicates a potentially hazardous situation.  
If not avoided, this could result in minor or moderate bodily  
injury.  
CAUTION!  
Low risk: Indicates a potentially hazardous situation.  
If not avoided, this could result in property damage or risk of  
damage to the unit.  
1.3  
Important notices  
Accessories - Do not place this unit on an unstable stand,  
tripod, bracket, or mount. The unit may fall, causing serious  
injury and/or serious damage to the unit. Use only with the  
cart, stand, tripod, bracket, or table specified by the  
manufacturer. When a cart is used, use caution and care when  
moving the cart/apparatus combination to avoid injury from  
tip-over. Quick stops, excessive force, or uneven surfaces may  
cause the cart/unit combination to overturn. Mount the unit  
per the manufacturer's instructions.  
All-pole power switch - Incorporate an all-pole power switch,  
with a contact separation of at least 3 mm in each pole, into the  
electrical installation of the building.If it is needed to open the  
housing for servicing and/or other activities, use this all-pole  
switch as the main disconnect device for switching off the  
voltage to the unit.  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Safety | en  
9
Coax grounding:  
Ground the cable system if connecting an outside cable  
system to the unit.  
Connect outdoor equipment to the unit's inputs only after  
this unit has had its grounding plug connected to a  
grounded outlet or its ground terminal is properly  
connected to a ground source.  
Disconnect the unit's input connectors from outdoor  
equipment before disconnecting the grounding plug or  
grounding terminal.  
Follow proper safety precautions such as grounding for  
any outdoor device connected to this unit.  
U.S.A. models only - Section 810 of the National Electrical Code,  
ANSI/NFPA No.70, provides information regarding proper  
grounding of the mount and supporting structure, grounding of  
the coax to a discharge unit, size of grounding conductors,  
location of discharge unit, connection to grounding electrodes,  
and requirements for the grounding electrode.  
Disposal - Your Bosch product was developed and  
manufactured with high-quality material and components that  
can be recycled and reused. This symbol means that electronic  
and electrical appliances, which have reached the end of their  
working life, must be collected and disposed of separately  
from household waste material. Separate collecting systems  
are usually in place for disused electronic and electrical  
products. Please dispose of these units at an environmentally  
compatible recycling facility, per European Directive 2002/96/  
EC  
Electronic Surveillance - This device is intended for use in  
public areas only. U.S. federal law strictly prohibits  
surreptitious recording of oral communications.  
Environmental statement - Bosch has a strong commitment  
towards the environment. This unit has been designed to  
respect the environment as much as possible.  
Electrostatic-sensitive device - Use proper CMOS/MOS-FET  
handling precautions to avoid electrostatic discharge.  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
10 en | Safety  
Small Size LCD/LED Monitors  
NOTE: Wear required grounded wrist straps and observe proper  
ESD safety precautions when handling the electrostatic-  
sensitive printed circuit boards.  
Fuse rating - For security protection of the device, the branch  
circuit protection must be secured with a maximum fuse rating  
of 16A. This must be in accordance with NEC800 (CEC Section  
60).  
Grounding and polarization - This unit may be equipped with a  
polarized alternating current line plug (a plug with one blade  
wider than the other blade). This safety feature allows the plug  
to fit into the power outlet in only one way. If unable to insert  
the plug fully into the outlet, contact a locally certified  
electrician to replace the obsolete outlet. Do not defeat the  
safety purpose of the polarized plug.  
Alternately, this unit may be equipped with a 3-pole grounding  
plug (a plug with a third pin for earth grounding). This safety  
feature allows the plug to fit into a grounded power outlet only.  
If unable to insert the plug into the outlet, contact a locally  
certified electrician to replace the obsolete outlet. Do not  
defeat the safety purpose of the grounding plug.  
Moving - Disconnect the power before moving the unit. Move  
the unit with care. Excessive force or shock may damage the  
unit and the hard disk drives.  
Outdoor signals - The installation for outdoor signals, especially  
regarding clearance from power and lightning conductors and  
transient protection, must be in accordance with NEC725 and  
NEC800 (CEC Rule 16-224 and CEC Section 60).  
Permanently connected equipment - Incorporate a readily  
accessible disconnect device in the building installation wiring.  
Pluggable equipment - Install the socket outlet near the  
equipment so it is easily accessible.  
Power resupply - If the unit is forced to power down due to  
exceeding the specified operating temperatures, disconnect  
the power cord, wait for at least 30 seconds, and then  
reconnect the power cord.  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Safety | en 11  
Power lines - Do not locate the display near overhead power  
lines, power circuits, or electrical lights, nor where it may  
contact such power lines, circuits, or lights.  
Rack-mount  
Ventilation - Do not place this unit in a built-in installation  
or rack without proper ventilation or adhering to the  
manufacturer's instructions. The equipment must not  
exceed its maximum operating temperature requirements.  
Mechanical loading - Properly mount the equipment in a  
rack to prevent a hazardous condition due to uneven  
mechanical loading.  
SELV  
All the input/output ports are Safety Extra Low Voltage (SELV)  
circuits. SELV circuits should only be connected to other SELV  
circuits.  
Because the ISDN circuits are treated like telephone-network  
voltage, avoid connecting the SELV circuit to the Telephone  
Network Voltage (TNV) circuits.  
System ground/Safety ground  
The system ground is only used to comply with safety standards  
or installation practices in certain countries. Bosch does not  
recommend connecting system ground to safety ground unless  
it is explicitly required. However, if the system ground and  
safety ground are connected and grounding loops are causing  
interference in the video signal, use an isolation transformer  
(available separately from Bosch).  
CAUTION!  
Connecting System ground to Safety ground may result in  
ground loops that can disrupt the CCTV system.  
Video loss - Video loss is inherent to digital video recording;  
therefore, Bosch Security Systems cannot be held liable for any  
damage that results from missing video information. To  
minimize the risk of lost digital information, Bosch Security  
Systems recommends multiple, redundant recording systems,  
and a procedure to back up all analog and digital information.  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
12 en | Safety  
Small Size LCD/LED Monitors  
NOTICE!  
This is a class A product. In a domestic environment this  
product may cause radio interference, in which case the user  
may be required to take adequate measures.  
FCC & ICES Information  
(U.S.A. and Canadian Models Only)  
This device complies with part 15 of the FCC Rules. Operation is  
subject to the following conditions:  
this device may not cause harmful interference, and  
this device must accept any interference received,  
including interference that may cause undesired operation.  
NOTE: This equipment has been tested and found to comply  
with the limits for a Class A digital device, pursuant to Part 15  
of the FCC Rules and ICES-003 of Industry Canada. These limits  
are designed to provide reasonable protection against harmful  
interference when the equipment is operated in a commercial  
environment. This equipment generates, uses, and radiates  
radio frequency energy and, if not installed and used in  
accordance with the instruction manual, may cause harmful  
interference to radio communications. Operation of this  
equipment in a residential area is likely to cause harmful  
interference, in which case the user will be required to correct  
the interference at his expense.  
Intentional or unintentional modifications, not expressly  
approved by the party responsible for compliance, shall not be  
made. Any such modifications could void the user's authority to  
operate the equipment. If necessary, the user should consult  
the dealer or an experienced radio/television technician for  
corrective action.  
The user may find the following booklet, prepared by the  
Federal Communications Commission, helpful: How to Identify  
and Resolve Radio-TV Interference Problems. This booklet is  
available from the U.S. Government Printing Office,  
Washington, DC 20402, Stock No. 004-000-00345-4.  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Safety | en 13  
Informations FCC et ICES  
(modèles utilisés aux États-Unis et au Canada uniquement)  
Ce produit est conforme aux normes FCC partie 15. la mise en  
service est soumises aux deux conditions suivantes :  
cet appareil ne peut pas provoquer d'interférence nuisible  
et  
cet appareil doit pouvoir tolérer toutes les interférences  
auxquelles il est soumit, y compris les interférences qui  
pourraient influer sur son bon fonctionnement.  
AVERTISSEMENT : Suite à différents tests, cet appareil s’est  
révélé conforme aux exigences imposées aux appareils  
numériques de Classe A en vertu de la section 15 du règlement  
de la Commission fédérale des communications des États-Unis  
(FCC). Ces contraintes sont destinées à fournir une protection  
raisonnable contre les interférences nuisibles quand l'appareil  
est utilisé dans une installation commerciale. Cette appareil  
génère, utilise et émet de l'energie de fréquence radio, et peut,  
en cas d'installation ou d'utilisation non conforme aux  
instructions, générer des interférences nuisibles aux  
communications radio. L’utilisation de ce produit dans une  
zone résidentielle peut provoquer des interférences nuisibles.  
Le cas échéant, l’utilisateur devra remédier à ces interférences  
à ses propres frais.  
Au besoin, l’utilisateur consultera son revendeur ou un  
technicien qualifié en radio/télévision, qui procédera à une  
opération corrective. La brochure suivante, publiée par la  
Commission fédérale des communications (FCC), peut s’avérer  
utile : How to Identify and Resolve Radio-TV Interference Problems  
(Comment identifier et résoudre les problèmes d’interférences  
de radio et de télévision). Cette brochure est disponible auprès  
du U.S. Government Printing Office, Washington, DC 20402,  
États-Unis, sous la référence n° 004-000-00345-4.  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
14 en | Safety  
Small Size LCD/LED Monitors  
Disclaimer  
Underwriter Laboratories Inc. (“UL”) has not tested the  
performance or reliability of the security or signaling aspects of  
this product. UL has only tested fire, shock and/or casualty  
hazards as outlined in UL's Standard(s) for Safety for Closed  
Circuit Television Equipment, UL 2044. UL Certification does not  
cover the performance or reliability of the security or signaling  
aspects of this product.  
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR  
CERTIFICATIONS WHATSOEVER REGARDING THE  
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR  
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.  
Disclaimer  
Underwriter Laboratories Inc. (“UL”) has not tested the  
performance or reliability of the security or signaling aspects of  
this product. UL has only tested fire, shock and/or casualty  
hazards as outlined in UL's Standard(s) for Safety for Information  
Technology Equipment, UL 60950-1. UL Certification does not  
cover the performance or reliability of the security or signaling  
aspects of this product.  
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR  
CERTIFICATIONS WHATSOEVER REGARDING THE  
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR  
SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT.  
Copyright  
This manual is the intellectual property of Bosch Security  
Systems and is protected by copyright.  
All rights reserved.  
Trademarks  
All hardware and software product names used in this  
document are likely to be registered trademarks and must be  
treated accordingly.  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Safety | en 15  
NOTE!  
This manual has been compiled with great care and the  
information it contains has been thoroughly verified. The text  
was complete and correct at the time of printing. The ongoing  
development of the products may mean that the content of the  
user guide can change without notice. Bosch Security Systems  
accepts no liability for damage resulting directly or indirectly  
from faults, incompleteness or discrepancies between the user  
guide and the product described.  
1.4  
Customer Support and Service  
If this unit needs service, contact the nearest Bosch Security  
Systems Service Center for authorization to return and shipping  
instructions.  
Service Centers  
USA  
Repair Center-  
Telephone: 800-566-2283  
Fax: 800-366-1329  
Customer Service  
Telephone: 888-289-0096  
Fax: 585-223-9180  
Technical Support  
Telephone: 800-326-1450  
Fax: 585-223-3508 or 717-735-6560  
Canada  
Telephone: 514-738-2434  
Fax: 514-738-8480  
Europe, Middle East, Africa Region  
Repair Center  
Telephone: 31 (0) 76-5721500  
Fax: 31 (0) 76-5721413  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
16 en | Safety  
Small Size LCD/LED Monitors  
Asia Region  
Repair Center  
Telephone: 65 63522776  
Fax: 65 63521776  
Customer Service  
Telephone: 86 (0) 756 7633117 or  
86 (0) 756 7633121  
Fax: 86 (0) 756 7631710  
Warranty and more information  
For additional information and warranty queries, please contact  
your Bosch Security Systems representative or visit our website  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Unpacking | en 17  
2
Unpacking  
This equipment should be unpacked and handled with care. If  
an item appears to have been damaged in shipment, notify the  
shipper immediately.  
Verify that all the parts listed in the Parts List below are  
included. If any items are missing, notify your Bosch Security  
Systems Sales or Customer Service Representative.  
The original packing carton is the safest container in which to  
transport the unit and must be used if returning the unit for  
service. Save it for possible future use.  
2.1  
Parts List  
Quantity Description  
1
1
Color LCD Flat Panel Monitor  
Installation Manual (printed booklet, English  
version)  
1
2
Installation manual (CD-ROM, multi-language  
version)  
Power Cords, 3-wire with grounded plug 1.8 m (6 ft)  
long: one with a U.S plug type and one with a  
European Continental plug type  
VGA to VGA (D-Sub) cable, 1.5 m (5 ft)  
Trigger cable  
1
1
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
18 en | Exploded View  
Small Size LCD/LED Monitors  
3
Exploded View  
Figure 3.1 Front Panel  
Ref. Button  
Description  
1
2
Speaker  
Input  
Generate sounds from the input audio signal.  
Selects the signal to be displayed.  
Serves as the “Enter” function for OSD menus.  
Selects the on-screen display (OSD).  
Adjusts the value when in the Scrolls up in the OSD.  
3
4
Menu  
OSD.  
5
Adjusts the value when in the Scrolls down in the  
OSD or auto adjusts when in OSD.  
PC mode.  
6
7
Decreases the value when in Scrolls left in the OSD.  
the OSD.  
Increases the value when in  
Scrolls right in the  
OSD.  
the OSD.  
8
9
Power  
Display Power (On/Off)  
LED Indicator Power On (green)  
Power Off, Standby (red)  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Exploded View | en 19  
Figure 3.2 Rear Panel (UML-080-90, UML-082-90)  
Ref Connector  
Ref Connector  
1
2
3
4
5
6
Audio In (for external audio)  
AV1 In  
AV1 Out  
AV2 In  
AV2 Out  
VGA In  
7
8
9
S-Video In  
12 VDC In  
Adjustable Stand  
10 Trigger Input  
11 RS-232 In (for firmware update)  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
20 en | Exploded View  
Small Size LCD/LED Monitors  
Figure 3.3 Rear Panel (UML-100-90, UML-102-90)  
Ref Connector  
Ref Connector  
1
2
3
4
5
6
Audio In (for external audio)  
AV1 In  
AV1 Out  
AV2 In  
AV2 Out  
VGA In  
7
8
9
S-Video In  
12 VDC In  
Adjustable Stand  
10 Trigger Input  
11 RS-232 In (for firmware update)  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Description | en 21  
4
Description  
The Bosch line of High Performance LCD/LED monitors are  
highly reliable display devices that combines the flexibility of  
signal connectivity and ease of operation. With the AV, Y/C (S-  
Video) and VGA terminals you can connect this monitor to a  
variety of devices like CCTV video cameras or a PC. The trigger  
signal input function allows you to implement the trigger  
warning mechanism easily with compatible CCTV video  
cameras. The multi-language On-screen Display (OSD) menu  
system provides an intuitive and convenient interface where  
you can easily change the settings of this monitor. An  
adjustable stand is provided so you can easily adjust the angle  
of the screen display when this monitor is placed on a table.  
Alternatively you can also wall-mount this monitor using the  
mounting screw holes on the rear panel of the monitor and a  
suitable wall mounting bracket.  
4.1  
Features  
8.4-in. and 10.4-in. models  
LED backlight models (UML-082-90, UML-102- 90) or CCFL  
models (UML-080-90, UML-100-90)  
NTSC/PAL Auto-Detect  
VGA Input  
640 x 480  
800 x 600  
1024 x 768  
Composite Video Input  
Y/C Input (S-Video)  
Trigger input  
Multi-language On-screen Display (OSD)  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
22 en | Description  
Small Size LCD/LED Monitors  
4.2  
Power  
Model No.  
Rated Voltage Voltage  
Range  
Power at Rated Sync Format  
Voltage  
UML-080-90 120/230 VAC  
100 to 240 V < 35 W  
NTSC/PAL  
NTSC/PAL  
NTSC/PAL  
NTSC/PAL  
50/60 Hz  
UML-100-90 120/230 VAC  
100 to 240 V < 35 W  
100 to 240 V < 35 W  
100 to 240 V < 35 W  
50/60 Hz  
UML-082-90 120/230 VAC  
50/60 Hz  
UML-102-90 120/230 VAC  
50/60 Hz  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Installing the Monitor | en 23  
5
Installing the Monitor  
This chapter outlines the procedures to install the UML-080-90,  
UML-100-90, UML-082-90 or the UML-102-90 Monitor. A  
qualified service person should install the monitor and adhere  
to all local codes.  
5.1  
5.2  
Ventilation  
To prevent overheating, ensure that the ventilation openings on  
the rear of the monitor are not covered.  
Mounting the Monitor  
The UML-080-90, UML-100-90, UML-082-90 and the UML-102-  
90 are designed for use on a desktop or mounted to a wall or  
rack.  
5.2.1  
Desktop Installation  
The Bosch High Performance monitors are delivered with a 3-  
pole US-style power cord and a 3-pole Euro-style power cord.  
Use the US-style power cord where 120 VAC, 60 Hz power is  
available; use the Euro-style power cord where 230 VAC, 50 Hz  
power is available. The monitor automatically adjusts to either  
power input voltage. The viewing angle of the LCD can be  
adjusted to fit the most comfortable monitoring status.  
Figure 5.1 Maximum degree = 35°  
NOTICE!  
The suggested bracket angle for the best viewing quality and  
holding support is between 25° to 35°.  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
24 en | Installing the Monitor  
Small Size LCD/LED Monitors  
5.2.2  
Wall Mount Installation  
This monitor can be wall-mounted using the square mounting  
holes (75 mm [2.95 in.] centers) and a suitable wall mount or  
swivel/tilt mount.  
Figure 5.2 Location of mounting holes  
5.3  
Connecting the Composite Video Signal to  
the Monitor  
There are two (2) BNC connectors located on the rear side  
panel of the monitor for composite video inputs and two (2)  
BNC connectors for composite video outputs (see Figure 3.2  
and Figure 3.3).  
Note: All video inputs are passive loop-through. The impedance  
is automatically set to 75 Ohm by the input of the signal on the  
input connector, while operating in a single connection mode  
(see Figure 5.5). If a cable is also connected to the output  
connector, the video signal can be passed on to another  
monitor connected to it via the passive loop-through function.  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Installing the Monitor | en 25  
Up to three (3) monitors may be connected in this manner (see  
Figure 5.6).  
Note: To select between AV1 and AV2, press Input (see  
Figure 3.1, Item 2) located on the front of the monitor.  
5.4  
Connecting the Y/C (S-Video) Signal to the  
Monitor  
There is one (1) mini-DIN type connector for the S-Video (Y/C)  
input (see Figure 3.2 and Figure 3.3) on the rear side panel.  
Note: Both Y and C inputs are terminated with 75 Ohm.  
Figure 5.3 Y/C Connector pin-out  
Number Input  
1
2
3
4
Ground  
Ground  
Y-signal  
C-signal  
5.5  
Connecting Audio to the Monitor  
There is one (1) set of stereo audio connectors for audio input,  
located on the rear panel.  
This audio input is not associated with any input terminals on  
the rear panel, and can be freely connected to any audio input.  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
26 en | Installing the Monitor  
Small Size LCD/LED Monitors  
5.6  
Connecting the PC Signal to the Monitor  
You can connect a PC signal to the monitor using the VGA  
connector on the rear panel and a VGA cable (D-SUB to D-SUB).  
Figure 5.4 VGA Input  
Pin Description  
Pin Description  
Pin Description  
11 Ground  
12 SDA (for DDC)  
13 H-Sync or H+V Sync  
14 V-Sync  
1
2
3
4
5
Red Video  
Green Video  
Blue Video  
Ground  
6
7
8
9
Red Ground  
Green Ground  
Blue Ground  
N/A  
Ground  
10 Signal Cable Detect 15 SCL (for DDC)  
5.7  
Single / Multiple Monitor Configuration  
Figure 5.5 Single Monitor Configuration  
Ref Description  
Ref Description  
1
2
Video Camera 3  
AV1 In  
AV1 Out  
DVR  
4
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Installing the Monitor | en 27  
Figure 5.6 Multiple Monitor Configuration  
Ref Description  
1
2
3
Video Camera  
AV1 In  
AV1 Out  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
28 en | Navigating the Monitor  
Small Size LCD/LED Monitors  
6
Navigating the Monitor  
6.1  
Navigating the Front Panel  
Use the front panel to make any necessary OSD adjustments to  
the UML-080-90, UML-100-90, UML-082-90 or the UML-102-90.  
See the figure below for an explanation of the front panel.  
Figure 6.1 Front Panel Buttons  
Ref. Button  
Description  
1
2
Speaker  
Input  
Generate sounds from the input audio signal.  
Selects the signal to be displayed.  
Serves as the “Enter” function for OSD menus.  
Selects the on-screen display (OSD).  
Adjusts the value when in the Scrolls up in the OSD.  
3
4
Menu  
OSD.  
5
Adjusts the value when in the Scrolls down in the  
OSD or auto adjusts when in OSD.  
PC mode.  
6
7
Decreases the value when in Scrolls left in the OSD.  
the OSD.  
Increases the value when in  
Scrolls right in the  
OSD.  
the OSD.  
8
9
Power  
Display Power (On/Off)  
LED Indicator Power On (green)  
Power Off, Standby (red)  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Navigating the Monitor | en 29  
6.2  
Navigating the Monitor On-screen Display  
(OSD)  
The UML-080-90, UML-100-90, UML-082-90 and the UML-102-  
90 have two (2) modes: Video and PC. The LCD is programmed  
through the on-screen display (OSD) menus and submenus  
where an operator can select operating parameters. To access  
the OSD menus, press the Menu button on the front panel. Use  
the front panel of the monitor to make any necessary  
adjustments to the OSD.  
NOTICE!  
When you are navigating through the OSD menus, use the Input  
button to select a menu and use the Menu button to exit a  
menu.  
To navigate the set up menus, follow the steps below:  
1. Connect the CVBS, S-Video or the VGA cable.  
2. Press the Power button to turn on the unit (see  
Figure 6.1).  
3. If required, press the Input button and the  
buttons until a signal is displayed.  
and  
4. Press the Menu button to activate the main menu  
selections (see Figure 6.1).  
5. Press the  
6. Press the Input button to enter the selected menu.  
7. Press the and buttons to select a sub-menu item.  
8. Press the Input button to enter the selected sub-menu.  
9. Press the and buttons to toggle the OSD values.  
and  
buttons to select a menu.  
10. Press the Menu button to exit the selected menu and to  
return to the menu bar or to confirm a selection.  
11. Press the Menu button again to exit the OSD menu bar.  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
30 en | Navigating the Monitor  
Small Size LCD/LED Monitors  
6.3  
On-screen Display Menus  
There are three (3) on-screen menus that allow you to  
customize your settings. Press the Menu button to access the  
OSD menu.  
Icon  
Menu  
Custom  
Function  
Adjusts the Brightness, Contrast, Color, Tint and  
the Sharpness level for video performance. (The  
menu options differ between the Video and PC  
modes.)  
Picture/Sound Adjusts the Picture Mode, Color Tone, Mute,  
Volume, Size, Overscan, DNR and the PC settings.  
(The menu options differ between the Video and  
PC modes.)  
Setup  
Enables user to Reset the factory default settings  
and to adjust the Language, OSD Tone, Blue  
Screen, Key Lock, Trigger and the Auto Switch  
settings.  
6.4  
Custom Menu  
To access the Custom menu, press the Menu button on the  
front panel of the monitor. Next, press the Input button and  
then press the up and down buttons to select a submenu. Press  
the Input button to enter the submenu, and then press the up  
and down buttons to change the values. When finished, press  
the Menu button to save any changes, then press the Menu  
button again to exit the OSD.  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Navigating the Monitor | en 31  
Custom  
Brightness  
Contrast  
Color  
Tint  
Sharpness  
50  
50  
50  
50  
50  
:Move  
:Input  
:Menu  
Table 6.1 Custom Menu (Video Mode)  
Custom  
Brightness  
Contrast  
50  
50  
:Move  
:Input  
:Menu  
Table 6.2 Custom Menu (PC Mode)  
Submenu  
Definition  
Brightness Adjusts the brightness level for video performance (range 0-100).  
Contrast  
Color  
Tint  
Adjusts the contrast level for video performance (range 0-100).  
Adjusts the overall intensity of the screen (range 0-100).  
Adjusts the tint of the picture (range 0-100). NTSC only.  
Sharpness Adjusts the sharpness level for video performance (range 0-100).  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
32 en | Navigating the Monitor  
Small Size LCD/LED Monitors  
6.5  
Picture/Sound Menu  
To access the Picture / Sound menu, press the Menu button on  
the front panel of the monitor, then press the up and down  
buttons to select the Picture / Sound icon. Press the Input  
button to enter the menu, and then press the up and down  
buttons to select a submenu  
Picture/Sound  
Picture Mode  
Color Tone  
Mute  
Standard  
6500°K  
Off  
Volume  
Size  
20  
4:3  
Overscan  
DNR  
3D Comb  
On  
On  
:Move  
:Input  
:Menu  
Table 6.3 Picture/Sound Menu (Video Mode)  
Picture/Sound  
Picture Mode  
Color Tone  
Mute  
Standard  
6500°K  
Off  
Volume  
PC  
20  
:Move  
:Input  
:Menu  
Table 6.4 Picture/Sound Menu (PC Mode)  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Navigating the Monitor | en 33  
Submenu  
Definition  
Picture Mode  
(Video Mode)  
Selects the automatic picture control mode. Choices are:  
Custom: User selected values of the Custom menu are applied.  
Dynamic: Automatically adjusts the Brightness, Contrast, and  
Sharpness, maximizing the video quality in the picture.  
Standard: Applies factory default values.  
Picture Mode  
(PC Mode)  
Selects the automatic picture control mode. Choices are Custom, High,  
Middle and Low.  
Color Tone  
Selects the color temperature. Choices are: 6500°K, 7500°K and  
9300°K.  
Mute  
Enables/disables audio. Choices are: On and Off.  
Volume  
Controls built-in speaker output volume (range 1-9).  
Size (Video  
Mode)  
Selects the Aspect Ratio Control mode. Choices are: 4:3, Panorama,  
Zoom1 and Zoom2.  
Overscan  
Adjusts the overscan settings when displaying video (non-PC) signals:  
H-Overscan: Adjusts the horizontal overscan size (range 1-9).  
V-Overscan: Adjusts the vertical overscan size (range 1-9).  
H-Phase: Adjusts the horizontal phase of the overscanned picture  
(range 1-9).  
(Vide Mode)  
V-Phase: Adjusts the vertical phase of the overscanned picture (range  
1-9).  
DNR (Video  
Mode)  
Turns Noise Reduction On or Off. Turning this feature OFF reduces the  
video quality slightly, but improves the monitors response time to  
MOTION.  
PC (PC Mode)  
Selects between Auto or manual adjustment of the desktop screen. Auto  
Adjust: Auto synchronizes screen to graphics adaptor.  
Manual choices are: Phase (range 0-100), H-Phase (range 0-100), V-  
Phase (range 0-100) and Frequency (range 0-100).  
3D Comb  
Enables or disables the 3D comb filter.  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
34 en | Navigating the Monitor  
Small Size LCD/LED Monitors  
6.6  
Setup Menu  
To access the Setup menu, press the Menu button on the front  
panel of the monitor, then press the up and down buttons to  
select the Setup icon. Press the Input button to enter the menu,  
and then press the up and down buttons to select a submenu.  
Setup  
Reset  
Language  
English  
On  
Off  
OSD Tone  
Blue Screen  
Key Lock  
Off  
Trigger  
Auto Switch  
Firmware Version  
X.X  
:Move  
:Input  
:Menu  
Table 6.5 Setup Menu  
Submenu  
Reset  
Definition  
Restores default settings.  
Language  
Adjusts the language of the OSD. Choices are: Chinese, Dutch,  
English, French, German, Italian, Polish, Portuguese, Russian, and  
Spanish.  
OSD Tones  
Blue Screen  
Selects the type of background for the OSD menu. Choices are:  
Transparency and On.  
Enables or disables video loss indication. Choices are:  
On: displays a blue background when video loss is detected.  
Off: displays a black backgound when video loss is detected.  
Key Lock  
Enables or disables the Key Lock function.  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Navigating the Monitor | en 35  
Trigger  
Enables or disables the Trigger function, and configures the trigger  
settings when enabled:  
Trigger Enable: Turns the Trigger function On of Off.  
Trigger Input: Selects the input signal source to display when a  
trigger signal is received.  
Buzzer: Turns the trigger buzzer tone On or Off.  
Trigger Time: Sets the time duration the trigger input (as set by the  
Trigger Input function) is displayed. Once the time expires, the  
monitor will automatically switch back to the last viewed input.  
Trigger Option: sets the trigger signal type to N/C (normal closed),  
N/O (normal opened), High (2~5V) or Low (0~0.6V).  
Auto Switching  
Enables or disables the auto switch function that allows the monitor  
to automatically switch to and display an available input signal.  
Firmware Version Displays the release level of the monitor firmware.  
NOTICE!  
When key lock is enabled through the front panel, use the front  
panel buttons to disable the key lock command. To disable the  
key lock feature using the front panel buttons, press and hold  
both the Input and the Menu buttons until the monitor displays  
the Key Unlocked message.  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
36 en | Power Management  
Small Size LCD/LED Monitors  
7
Power Management  
These monitors feature a power management system to “power  
down” upon receipt of the display power management signaling  
(DPMS) from a DPMS video card.  
The DPMS-compliant video card performs this signaling by not  
sending a horizontal, vertical, or a sync signal.  
The monitor enters an appropriate mode through identifying  
each of the three (3) modes of the signaling system.  
7.1  
7.2  
Power Consumption  
Mode  
Power Consumption  
ON  
STANDBY  
ACTIVE OFF  
35 W  
2 W  
1 W  
LED Indicator  
The power management feature of the monitor is comprised of  
these stages:  
Mode  
LED Color  
Monitor Operation  
ON  
Green  
Normal Operation  
STANDBY  
ACTIVE OFF  
Flashes Red Screen blanks after idle time and  
some electronic circuits or all  
circuitry in the monitor shuts down.  
UNSUPPORTED MODE Green  
Normal operation but the screen  
displays an error message.  
Not Operational  
POWER OFF  
Red  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Troubleshooting | en 37  
8
Troubleshooting  
Problem  
Solution  
No image displayed on screen –  
Check that the power cord of the monitor is  
securely connected into the wall outlet or grounded  
extension cable or strip.  
Power switch should be in the ON position and the  
LED lit.  
Check that the Brightness and/or Contrast  
adjustments of the display have not been turned  
down to minimum levels.  
The message "No Signal" is  
displayed  
The signal cable should be completely connected to  
the video card/computer.  
The video card should be completely seated in its  
slot and the computer switched ON.  
Display image is not  
Push the down key to activate the Auto Adjust function.  
- or -  
centered, is too small or too  
large in the PC mode  
Adjust the Frequency and Phase in the PC OSD submenu.  
Vertical or horizontal noise is Push the down key to activate the Auto Adjust function.  
present in the picture  
- or -  
Adjust the Frequency and Phase in the PC OSD submenu.  
Select 6500°K, 7500°K or 9300°K in the Color Tone menu.  
Incorrect colors  
- or -  
Use the Reset function to reset to the default settings.  
PC is operating with either a resolution or timing mode  
that is not supported by the monitor. Change the PC  
The error message “Out of  
Range” is displayed  
timing mode to one of the valid combinations below:  
640 x 480; 60/72/75 Hz  
800 x 600; 60/72/75 Hz  
1024 x 768; 60/70/75 Hz  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
38 en | Maintenance  
Small Size LCD/LED Monitors  
9
Maintenance  
To clean the LCD panel, wipe off water droplets or oil  
immediately with absorbent cotton or a soft lint-free cloth.  
Staining and discoloration may occur if left on the panel for  
long periods. If the surface (polarizer) of the LCD panel is dirty  
or stained, use absorbent cotton or a soft lint-free cloth to  
remove the residue as follows:  
1. Turn off the display and disconnect it from the power  
supply.  
2. Do not spray any liquid directly on the screen. Dampen a  
clean, soft, lint-free cloth with water only (using a paper  
towel or dirty cloth can scratch the screen).  
3. Gently wipe the screen starting from the top of the screen  
to bottom wiping in a downward motion. Be careful not to  
press too hard to avoid damaging the screen.  
4. To avoid streaking, wipe the screen again with another  
clean, dry, lint-free cloth.  
NOTICE!  
If water does not work, use a mild cleaner labeled for use with  
LCD panels, available at office supply stores.  
Do not use any of the following as a cleaning agent:  
Ketone type materials  
Ethyl alcohol  
Ethyl acid  
Toluene  
Methyl chloride  
Ammonia  
Use of these materials may permanently damage the polarizer  
due to a chemical reaction.  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
Small Size LCD/LED Monitors  
Technical Specifications | en 39  
10  
Technical Specifications  
10.1  
UML-080-90/UML-100-90  
Model  
UML-080-90  
UML-100-90  
LCD Specifications  
LCD Type  
8.4 in. Digital LCD  
CCFL  
10.4 in. Digital LCD  
CCFL  
Backlight Type  
Pixel Pitch (H x V)  
Brightness  
0.213 x 0.213 mm  
0.264 x 0.264 mm  
2
2
250 cd/m (typical)  
230 cd/m (typical)  
Contrast Ratio  
Response Time  
Resolution (H x V)  
Frequency  
600:1 (typical)  
10 ms (typical)  
800 x 600  
500:1 (typical)  
20 ms (typical)  
800 x 600  
Horizontal: 31 - 48 KHz  
Horizontal: 31 - 48 KHz  
Vertical: 56 - 75 Hz  
Vertical: 56 - 75 Hz  
Input Signal  
Video (BNC 2ch input 1.0 Vp-p, 75 Ohm terminated, loop-  
through out)  
S-Video (Mini Din 4-pin 1ch input (Y/C))  
Audio In (L/R)  
Trigger In  
Active Display Area (H x V) 170.4 x 127.8 mm  
211.2 x 158.4 mm  
Packing Dimensions  
503 x 349 x 343 mm  
503 x 349 x 343 mm  
(19.8 x 13.7 x 13.5 in.)  
1.16 kg (2.56 lb)  
12 VDC, 2.5 A  
(19.8 x 13.7 x 13.5 in.)  
1.53kg (3.37 lb)  
12 VDC, 2.5 A  
Weight  
Electric Ratings  
Bosch Security Systems, Inc.  
User Manual  
F.01U.134.499 | 1.0 | 2009.07  
 
40 en | Technical Specifications  
Small Size LCD/LED Monitors  
10.2  
UML-082-90/UML-102-90  
Model  
UML-082-90  
UML-102-90  
LCD Specifications  
LCD Type  
8.4 in. Digital LCD  
LED  
10.4 in. Digital LCD  
LED  
Backlight Type  
Pixel Pitch (H x V)  
Brightness  
0.213 x 0.213 mm  
0.264 x 0.264 mm  
2
2
450 cd/m (typical)  
400 cd/m (typical)  
Contrast Ratio  
Response Time  
Resolution (H x V)  
Frequency  
600:1 (typical)  
10 ms (typical)  
800 x 600  
700:1 (typical)  
20 ms (typical)  
800 x 600  
Horizontal: 31 - 48 KHz  
Horizontal: 31 - 48 KHz  
Vertical: 56 - 75 Hz  
Vertical: 56 - 75 Hz  
Input Signal  
Video (BNC 2ch input 1.0 Vp-p, 75 Ohm terminated, loop-  
through out)  
S-Video (Mini Din 4-pin 1ch input (Y/C))  
Audio In (L/R)  
Trigger In  
Active Display Area (H x V) 170.4 x 127.8 mm  
211.2 x 158.4 mm  
Packing Dimensions  
503 x 349 x 343 mm  
503 x 349 x 343 mm  
(19.8 x 13.7 x 13.5 in.)  
1.20 kg (2.65 lb)  
12 VDC, 2.5 A  
(19.8 x 13.7 x 13.5 in.)  
1.59 kg (3.51 lb)  
12 VDC, 2.5 A  
Weight  
Electric Ratings  
F.01U.134.499 | 1.0 | 2009.07  
User Manual  
Bosch Security Systems, Inc.  
 
 
Bosch Security Systems, Inc.  
850 Greenfield Road  
Lancaster, PA 17601  
U.S.A.  
Telephone +1 800-566-2283  
Fax  
+1 800-366-1329  
© Bosch Security Systems, Inc., 2009, Data subject to change.  
 

Belkin Network Cables PM00760 A F4U001 User Manual
Black Box Security Camera Blackbox IP Security Camera and Accessories User Manual
Black Decker Trimmer 90512730 User Manual
Bolens Lawn Mower 589 User Manual
Bosch Power Tools Sander 0603310639 User Manual
Bostitch Staple Gun T55 User Manual
Braun Hair Dryer HD 730 User Manual
Bushnell Binoculars 18 1035 User Manual
Carrier Air Conditioner 38EB User Manual
Chamberlain Home Security System CLLAD User Manual