Casio Clock DQ 746 User Manual

MA0506-EA  
Operation Guide DQ-746  
ILLUSTRATION  
GENERAL GUIDE  
1 SNOOZE/LIGHT button  
Press this button to illuminate the display for about five seconds.  
Pressing this button while the alarm is sounding stops the alarm.  
INVALID  
RESET  
2 Alarm Mode selector  
SNZ: Snooze alarm on  
ON: Alarm on  
OFF: Alarm off  
3 + / – buttons  
Use these buttons to change the alarm time or the setting that is flashing on the display.  
4 °C/°F button  
Press this button to toggle the temperature units between Celsius and Fahrenheit.  
5 SET button  
Use this button when setting the current time.  
INVALID  
RESET  
6 RESET button  
Press this button to reset the clock after replacing its batteries.  
Buttons marked “INVALID” have no function.  
°C/°F  
SET  
USING THE CLOCK  
1. Press the SET button (5) to cycle through the setting screens as shown below.  
°C/°F  
SET  
Normal Timekeeping Screen  
Year Setting Screen  
Month and Day  
Setting Screen  
Time Setting Screen  
12-hour/24-hour  
Timekeeping Screen  
2. While the screen you want is displayed, use the + and buttons  
(3) to change the flashing digits.  
Holding down + or changes the flashing digits at high speed.  
You can set the year in the range of 2000 to 2039. The day of the  
week is set automatically in accordance with the date setting.  
Pressing + or while the Time Setting Screen is on the display  
causes the seconds count to be reset to 00.  
Each press of + or while the 12-hour/24-hour Timekeeping  
Screen is on the display toggles between 12-hour and 24-hour  
timekeeping.  
A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the  
clock.  
+
Press to  
Press to  
Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.  
decrease  
the flashing  
digits.  
increase  
the flashing  
digits.  
°C/°F  
SET  
Alarm Off  
Snooze Alarm On  
PM indicator  
3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.  
The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for  
about three minutes without performing any operation.  
Current time  
(Hour, minutes,  
seconds)  
Snooze on  
indicator  
Date  
(month - day)  
Current  
temperature  
Day of the week  
Alarm time  
Alarm on indicator  
1
 

Belkin Network Router PM01218ea F5D7634 4 User Manual
Bertazzoni Range A304GGVXE User Manual
Black Decker Pole Saw GPC1800L User Manual
Bosch Appliances Home Security System DS7400XI User Manual
Broil King Food Warmer MLB CSLP User Manual
Cambridge Audio Stereo Amplifier 640A V2 User Manual
Canon Camera Lens EF S18 135MM F 35 56 IS User Manual
Canon Scanner N1240U User Manual
Chariot Carriers Baby Carrier Babya Carrier User Manual
Cilo DVD Player C 101 User Manual